PWM Controller LED Power Repeater With Synchronous Changing Signal 700mA

PWM controller constant current led power repeater 700mA 3CH for CC RGB lighting

LED power repeater is suitable for all of our single color & RGB controllers to expand power output, it supports PWM control and can connect one to three times more LEDs by adding one more power repeater, and unlimited power repeaters can be connected together theoretically.

The constant voltage power repeaters and constant current power repeaters can be connected together, which is convenient for controlling LEDs with different voltage and power.

Signal input and output of LED power repeater have security protection function with photoelectricity isolation of 5KV.

Features:

1. For power repeat of synchronous changing signal.
2. Support high frequency controller output interface.
3. 3 channel RGB control, Each channel the max current is 700mA, constant current PWM output, the total output power is not more than 96W.
4. Cooperate with the LED controller,DMX512 decoder realizes the online control, Can realize rich change effect.
5. Accept the PWM control.
6. Match with many kinds of LED modules.
7. Theoretically we can connect limitless LED modules by connecting the repeaters in series.

Size:

Product Instructions:

(Graph one): Panel operation shows, the signal input and output terminals are pressing line interfaces, the output driver is altogether anode lamps.
(Graph two): The RJ45 interfaces are input / output signal.

(Graph three): 2 PIN is for DC12~48V input, 4 PIN is for the altogether anode output with LED load.

Cautions:

1.This products Input voltage is DC12V-48V,other input voltage are not allowed.
2.Lead wire should be connected correctly,according to the wire color and the connecting diagram offers
3.Overload are prohibited.

led strip repeater

led power amplifier

PWM Controller LED Power Repeater With Synchronous Changing Signal 700mA Images