Max 5A*4CH DIN Rail Version DMX512 Decoder LED Dimmer Controller
Model : DE8704 Manual Download:DE8704 .pdf
DE8704 is the 4 channels product of DIN Rail DMX512 Decoder Series.
DIN rail products is widely used Lighting field. It can realize
removing after installing within a fixed rail. It can be wall
mounted or inverted as you need. Much more easy to install and
operation, beautiful appearance and rich function, this products
will be your best choice of DIN rail DMX decoder.
1), Meets DMX512/1990,with RJ45 interface.
2), 256-levels brightness,full-color with driver controls.
3), Power without flashing, low jitter free.
4), 4 ways of output channel, single channel maximum 5A output
drive, total output is less than 20A.
5), Can achieve asynchronous color changes effect under working
6), With the light color selected mechanism, and be able to control
the light with 1~4 colors.
7), Setting the DMX address freely.
8), Modularizing and can be matched with different LED module
9), With function of DIN rail.
10), Custom-made is available and 3 years warranty.
|Model No.: DE8704||Control channels: 4CH||Signal Input: DMX512/1990|
|Input:: DC12-24V||Output: 5A/CH, Max 20A||MAX Power: 240W(12V)/480W(24V)|
|Frequency: 5000HZ||Warranty: 3 years||Protection Class: IP40|
|Work Temp.: -20~70℃||Product size: L107*W72*H59(mm)||Gross Weight:: 300g|
Specifications of DIN Rail Series:
|Channels||Max Current Load||Input Signal||Max Output Power||DIN Rail|
Product Instructions of 4CH DIN Rail DMX Decoder DE8704:
1. The driving output interface of Yang drive, with 1 V+ ports and 4
channels CH1, CH2, CH3, CH4
output interface,can be connected with various full-color module
and module automatically according to the lamp module load
adjustment of output current, each channel shall not be greater
2. Note: the total connection full-color module directly to the main line
and CH1, CH2, CH3, CH4 control line is connected to the output of
the decoder interface corresponding pins; single module can be
connected to the decoder output interface is V+ feet, negative
lines according to the output of CH1, this module is connected to
the CH2 color decoder CH3, CH4, a foot on amonochrome module;
several colors received the same decoder output interface, will be
their main line are connected to a decoder of V+ feet.
3. Self-test Function: full bright mode, will be 1 to 9 of the dial switch upward pull
full bright. Four
channel gradient mode, will be 1 to 9 of the dial switch down to
pull out the channel gradient mode.
DMX512 Control System Connection:
1), DMX signal cable is shielded twisted pair cable(microphone cable)
or three core cable, DMX signal positive, negative in the end, solder or crimp DMX signal cable
plug should be paid special attention to the polarity.The input interface and corresponding signal output
from the DMX512 controller, signal is negative, and the connection of DE8704 signal.
2), The DMX5000 output and DE8704 transmission line can't exceed 300
3), DMX5000 and DE8704 wiring, lighting by JBLED FLASH software can
realize the control and
computer on-line,realize unlimited expansion cascade with DMX lamp.
4), Every connected 32 DE8704 control, DMX signal must be combined
with a signal amplifier (such
as: RE2000),cascade cannot be more than 4PCS.
5), At the end of the line, shall be connected to a DMX signal
termination (DE8704 dial switch tenth dial can).
Why choose us ?
(1)We are a manufacturer specializing in the R&D of LED
Controllers over 8 years in Shanghai .
(2)All our products got the CE , ROHS certificates .
(3)Three years warranty for all products .
(4)OEM/ODM are available for us .
How could I pay for it ?
T/T , Western Union ,Paypal and Credit Card are available for
How fast can I get these products ?
Usually , samples order within 2-3 working days. Batch order within
5-7working days .
What should we do if having problems after receiving your goods ?
Quality is our culture.Strictly inspected before shipping . Once
you receivedissatisfied products , please contact us freely in
time,we will do our best to deal with .