RGBW 10A*4CH Constant Voltage LED DMX512 Decoder
Model : DE8358 Manual Download: DE8504 .pdf
The DMX512 Decoder series adopt the advanced micro-computer control
technology. It can convert the DMX-512/1990 standard digital signal
adopted widely in international to the analog control signal.
The DE8359 can output 1~6 Channels for option and each channel able
to achieve 256 levels of brightness controlling,and also it can be
used as the connector of PC digital-light controller and analog
light modulator. It has been widelyly used in Landscaping and
1, Meets DMX512/1990,with RJ45 interface and XLR to choose.
2, Can realize 256-levels brightness adjustment by the buttons.
3, Power without ashing, smooth at low.
4, Four ways of output channel, single channel maximum 10A output
drive, total output is less than 40A.
5, Can achieve asynchronous color changes effect under working with
6, With the light color selected mechanism, and be able to control
the light with up to 4 colors.
7, Setting the DMX address freely by dip switch.
8. Customized available and 3 years warranty.
|Model No.: DE8504||Control channels: 4CH||Signal Input: DMX512/1990|
|Input:: DC12-24V||Output: 10A/CH, Max 40A||MAX Power: 480W(12V)/960W(24V)|
|Frequency: 500Hz/5KHZ||PWM Resolution Ratio: 8bit / 18bit||Protection Class: IP40|
|Work Temp.: -20~70℃||Product size: L122*W107*H33(mm)||Gross Weight:: 400g|
Product Size :
1, DMX Signal IN/OUT interface: RJ45/3 Pin screws/5 Pin XLR
connector. Specially 3 Pin screws interface with signal amplifier
2, DMX address encode with Dip-Switch(NO.1 to NO.9),comply to
universal DMX512 dial code.
3, Dip-Switch NO.10 is termination for whole signal circle.
4, Dip-Switch NO.11 for Frequency option: ON 5000HZ(H), OFF 500Hz(L).
5, Dip-Switch NO.12 for Bit option: ON 16bit ,OFF 8bit.
NOTE: NO.11 and NO.12 change, come into operation when Re-Power on.
6, POWER IN DC12-24V, common anode constant voltage output, can meet
all kinds of full color module andmonochrome module and
automatically according to the lamps module load adjust output
current, each channelmaximum current not more than 4 amps.
7, SELF-TESTING: put all Dip-Switch NO.1 to NO.9 off, full channels output 3
seconds, then each color gradient.
Instructions about Connection:
1, DMX signal cable is made of twisted pair (line), DMX signal
includes positive and negative end, in pressure welding DMX signal
line plug should pay special attention to polarity. DMX512
controller input and output signal positive,signal nagative,signal
ground with DE8504 input interface corresponding connection.
2, The DMX5000 output and DE8504's transmission lines can't be over
3, The DMX5000 each interface can connect with no more than 170
pieces of DE8504. Eight output interface. Through the JBLED FLASH
light making software,it can realize infinite connectting the DMX
lights with computer on-line controlling.
4, When contacting 32 pieces of DE8504, DMX signal must add a signal
amplifier such as RE2000,cascade can't more than 4 PCS.
5, At the end of the connection, we should connect a DMX signal
termination when putting on the the NO.10 dip switch of DE8504.
1, Why choose us ?
(1)We are a manufacturer specializing in the R&D of LED
Controllers over 8 years in Shanghai .
(2)All our products got the CE , ROHS certificates .
(3)Three years warranty for all products .
(4)OEM/ODM are available for us .
2, How could I pay for it ?
T/T , Western Union ,Paypal and Credit Card are available for
3, How fast can I get these products ?
Usually , samples order within 2-3 working days. Batch order within
5-7working days .
4, What should we do if having problems after receiving your goods
Quality is our culture.Strictly inspected before shipping . Once
you receivedissatisfied products , please contact us freely in
time,we will do our best to deal with .